Titulaire de la chaire CRSNG en efficacité énergétique à l’Université de Sherbrooke (2014-19)
Editorial board : "Journal of Nonlinear Dynamics", "Progress in Computational Fluid Dynamics", "American Journal of Fluid Mechanics", the "Scientific World Journal"
Activités
Ecoulements en rotation: Taylor-Couette, rotor-stator, Von Karman…
Problèmes de refroidissement de machines électriques par jet impactant…
Production, stockage et transport de froid par coulis de glace
Modélisation numérique des éjecteurs mono et diphasiques
Modélisation d’un régénérateur poreux en réfrigération magnétique
Transport de mucus dans le système respiratoire humain
Publications scientifiques au M2P2
2019
Sylvain Chateau, Julien Favier, Sébastien Poncet, Umberto d'Ortona. Why antiplectic metachronal cilia waves are optimal to transport bronchial mucus. Physical Review E , 2019, 100 (4), pp.042405. ⟨10.1103/PhysRevE.100.042405⟩. ⟨hal-02468006⟩ Plus de détails...
The coordinated beating of epithelial cilia in human lungs is a fascinating problem from the hydrodynamics perspective. The phase lag between neighboring cilia is able to generate collective cilia motions, known as metachronal waves. Different kinds of waves can occur, antiplectic or symplectic, depending on the direction of the wave with respect to the flow direction. It is shown here, using a coupled lattice Boltzmann-immersed boundary solver, that the key mechanism responsible for their transport efficiency is a blowing-suction effect that displaces the interface between the periciliary liquid and the mucus phase. The contribution of this mechanism on the average flow generated by the cilia is compared to the contribution of the lubrication effect. The results reveal that the interface displacement is the main mechanism responsible for the better efficiency of antiplectic metachronal waves over symplectic ones to transport bronchial mucus. The conclusions drawn here can be extended to any two-layer fluid configuration having different viscosities, and put into motion by cilia-shaped or comb-plate structures, having a back-and-forth motion with phase lags.
Sylvain Chateau, Julien Favier, Sébastien Poncet, Umberto d'Ortona. Why antiplectic metachronal cilia waves are optimal to transport bronchial mucus. Physical Review E , 2019, 100 (4), pp.042405. ⟨10.1103/PhysRevE.100.042405⟩. ⟨hal-02468006⟩
Yongliang Feng, Pierre Boivin, Jérome Jacob, Pierre Sagaut. Hybrid recursive regularized lattice Boltzmann simulation of humid air with application to meteorological flows. Physical Review E , 2019. ⟨hal-02265484⟩ Plus de détails...
An extended version of the hybrid recursive regularized Lattice-Boltzmann model which incorporates external force is developed to simulate humid air flows with phase change mechanisms under the Boussinesq approximation. Mass and momentum conservation equations are solved by a regu-larized lattice Boltzmann approach well suited for high Reynolds number flows, whereas the energy and humidity related equations are solved by a finite volume approach. Two options are investigated to account for cloud formation in atmospheric flow simulations. The first option considers a single conservation equation for total water and an appropriate invariant variable of temperature. In the other approach, liquid and vapor are considered via two separated equations, and phase transition is accounted for via a relaxation procedure. The obtained models are then systematically validated on four well-established benchmark problems including a double diffusive Rayleigh Bénard convection of humid air, 2D and 3D thermal moist rising bubble under convective atmospheric environment as well as a shallow cumulus convection in framework of large-eddy simulation.
Yongliang Feng, Pierre Boivin, Jérome Jacob, Pierre Sagaut. Hybrid recursive regularized lattice Boltzmann simulation of humid air with application to meteorological flows. Physical Review E , 2019. ⟨hal-02265484⟩
Mohamad Cheayb, Mylène Marin Gallego, Mohand Tazerout, Sébastien Poncet. Modelling and experimental validation of a small-scale trigenerative compressed air energy storage system. Applied Energy, 2019, 239, pp.1371-1384. ⟨10.1016/j.apenergy.2019.01.222⟩. ⟨hal-02384256⟩ Plus de détails...
• A thermodynamic model of a simple trigenerative-CAES is developed. • The model is validated experimentally. • The performances of the simple configuration are assessed. • Technological issues on the trigenerative CAES are highlighted. New advances in compressed air energy storage systems have been recently made especially regarding the use of heat generated from compression. On this basis, the concept of the trigenerative compressed air energy storage (T-CAES) has recently been proposed. Many studies highlighted the feasibility and the benefits of this system to be placed close to the energy demand. The aim of this study is to examine a simple configuration of this system by a coupled experimental/mod-elling approach. This paper presents a detailed thermodynamic model of both the main components and the whole system. An experimental bench is used to validate the model and to investigate the effect of the operating parameters on the system efficiency and the model accuracy. The model predictions are consistent with the experimental measurements during the charge, storage and discharge phases. It has been found that the temperature drop across the pressure regulator should not be ignored and is governed by the Joule-Thomson effect. Besides, it has been observed that the input temperature of the air motor must be accounted for in the assessment of future improved configurations. It was noted that the system efficiency increases significantly by adding the cooling and heating potentials. However, the round trip efficiency remains low at 15.6%. Output values of the model are in good agreement with the experimental results with an error less than 13.2%. The model can be applied as a basis for the performance assessment of prospective configurations and improvements of trigenerative compressed air energy storage.
Mohamad Cheayb, Mylène Marin Gallego, Mohand Tazerout, Sébastien Poncet. Modelling and experimental validation of a small-scale trigenerative compressed air energy storage system. Applied Energy, 2019, 239, pp.1371-1384. ⟨10.1016/j.apenergy.2019.01.222⟩. ⟨hal-02384256⟩
F. Muller, A. Burbeau, B.-J. Gréa, Pierre Sagaut. Minimum enstrophy principle for two-dimensional inviscid flows around obstacles. Physical Review E , American Physical Society (APS), 2019, 99 (2), ⟨10.1103/PhysRevE.99.023105⟩. ⟨hal-02176949⟩ Plus de détails...
Large-scale coherent structures emerging in two-dimensional flows can be predicted from statistical physics inspired methods consisting in minimizing the global enstrophy while conserving the total energy and circulation in the Euler equations. In many situations, solid obstacles inside the domain may also constrain the flow and have to be accounted for via a minimum enstrophy principle. In this work, we detail this extended variational formulation and its numerical resolution. It is shown from applications to complex geometries containing multiple circular obstacles that the number of solutions is enhanced, allowing many possibilities of bifurcations for the large-scale structures. These phase change phenomena can explain the downstream recombinations of the flow in rod-bundle experiments and simulations.
F. Muller, A. Burbeau, B.-J. Gréa, Pierre Sagaut. Minimum enstrophy principle for two-dimensional inviscid flows around obstacles. Physical Review E , American Physical Society (APS), 2019, 99 (2), ⟨10.1103/PhysRevE.99.023105⟩. ⟨hal-02176949⟩
Sylvain Chateau, Umberto d'Ortona, Sébastien Poncet, Julien Favier. Transport and Mixing Induced by Beating Cilia in Human Airways. Frontiers in Physiology, 2018, 9, pp.161. ⟨10.3389/fphys.2018.00161⟩. ⟨hal-01875672⟩ Plus de détails...
The fluid transport and mixing induced by beating cilia, present in the bronchial airways, are studied using a coupled lattice Boltzmann-Immersed Boundary solver. This solver allows the simulation of both single and multi-component fluid flows around moving solid boundaries. The cilia aremodeled by a set of Lagrangian points, and Immersed Boundary forces are computed onto these points in order to ensure the no-slip velocity conditions between the cilia and the fluids. The cilia are immersed in a two-layer environment: the periciliary layer (PCL) and the mucus above it. The motion of the cilia is prescribed, as well as the phase lag between two cilia in order to obtain a typical collective motion of cilia, known as metachronal waves. The results obtained from a parametric study show that antiplectic metachronal waves are the most efficient regarding the fluid transport. A specific value of phase lag, which generates the larger mucus transport, is identified. The mixing is studied using several populations of tracers initially seeded into the pericilary liquid, in the mucus just above the PCL-mucus interface, and in the mucus far away from the interface. We observe that each zone exhibits different chaotic mixing properties. The larger mixing is obtained in the PCL layer where only a few beating cycles of the cilia are required to obtain a full mixing, while above the interface, the mixing is weaker and takes more time. Almost no mixing is observed within the mucus, and almost all the tracers do not penetrate the PCL layer. Lyapunov exponents are also computed for specific locations to assess how the mixing is performed locally. Two time scales are introduced to allow a comparison between mixing induced by fluid advection and by molecular diffusion. These results are relevant in the context of respiratory flows to investigate the transport of drugs for patients suffering from chronic respiratory diseases.
Sylvain Chateau, Umberto d'Ortona, Sébastien Poncet, Julien Favier. Transport and Mixing Induced by Beating Cilia in Human Airways. Frontiers in Physiology, 2018, 9, pp.161. ⟨10.3389/fphys.2018.00161⟩. ⟨hal-01875672⟩
Olivier Lafforgue, Isabelle Seyssiecq, Sébastien Poncet, Julien Favier. Rheological properties of synthetic mucus for airway clearance. Journal of Biomedical Materials Research Part A, 2018, 106 (2), pp.386 - 396. ⟨10.1002/jbm.a.36251⟩. ⟨hal-01678912⟩ Plus de détails...
In this work, a complete rheological characterization of bronchial mucus simulants based on the composition proposed by Zahm et al. [1] is presented. Dynamic Small Amplitude Oscillatory Shear (SAOS) experiments, Steady State (SS) flow measurements and three Intervals Thixotropy Tests (3ITT), are carried out to investigate the global rheological complexities of simulants (viscoelasticity, viscoplasticity, shear-thinning and thixotropy) as a function of scleroglucan concentrations (0.5 to 2wt%) and under temperatures of 20 and 37 °C. SAOS measurements show that the limit of the linear viscoelastic range as well as the elasticity both increase with increasing sclerogucan concentrations. Depending on the sollicitation frequency, the 0.5wt% gel response is either liquid-like or solid-like, whereas more concentrated gels show a solid-like response over the whole frequency range. The temperature dependence of gels response is negligible in the 20-37°C range. The Herschel-Bulkley (HB) model is chosen to fit the SS flow curve of simulants. The evolution of HB parameters versus polymer concentration show that both shear-thinning and viscoplasticity increase with increasing concentrations. 3ITTs allow calculation of recovery thixotropic times after shearings at 100s-1 or 1.6s-1. Empiric correlations are proposed to quantify the effect of polymer concentration on rheological parameters of mucus simulants.
Olivier Lafforgue, Isabelle Seyssiecq, Sébastien Poncet, Julien Favier. Rheological properties of synthetic mucus for airway clearance. Journal of Biomedical Materials Research Part A, 2018, 106 (2), pp.386 - 396. ⟨10.1002/jbm.a.36251⟩. ⟨hal-01678912⟩
Journal: Journal of Biomedical Materials Research Part A
Olivier Lafforgue, N. Bouguerra, Sebastien Poncet, Isabelle Seyssiecq, Julien Favier, et al.. Thermo-physical properties of synthetic mucus for the study of airway clearance. Journal of Biomedical Materials Research Part A, 2017, 105 (11), pp.3025-3033 ⟨10.1002/jbm.a.36161⟩. ⟨hal-01596484⟩ Plus de détails...
In this article, dynamic viscosity, surface tension, density, heat capacity and thermal conductivity, of a bronchial mucus simulant proposed by Zahm et al., Eur Respir J 1991; 4: 311–315 were experiementally determined. This simulant is mainly composed of a galactomannan gum and a scleroglucan. It was shown that thermophysical properties of synthetic mucus are dependant of scleroglucan concentrations. More importantly and for some scleroglucan concentrations, the syntetic mucus, exhibits, somehow, comparable thermophysical properties to real bronchial mucus. An insight on the microstructure of this simulant is proposed and the different properties enounced previously have been measured for various scleroglucan concentrations and over a certain range of operating temperatures. This synthetic mucus is found to mimic well the rheological behavior and the surface tension of real mucus for different pathologies. Density and thermal properties have been measured for the first time.
Olivier Lafforgue, N. Bouguerra, Sebastien Poncet, Isabelle Seyssiecq, Julien Favier, et al.. Thermo-physical properties of synthetic mucus for the study of airway clearance. Journal of Biomedical Materials Research Part A, 2017, 105 (11), pp.3025-3033 ⟨10.1002/jbm.a.36161⟩. ⟨hal-01596484⟩
Journal: Journal of Biomedical Materials Research Part A
Sylvain Chateau, Julien Favier, Umberto D’ortona, Sebastien Poncet. Transport efficiency of metachronal waves in 3D cilium arrays immersed in a two-phase flow. Journal of Fluid Mechanics, 2017, 824, pp.931 - 961. ⟨10.1017/jfm.2017.352⟩. ⟨hal-01592834⟩ Plus de détails...
This work reports the formation and characterization of antipleptic and symplectic metachronal waves in 3D cilium arrays immersed in a two-fluid environment, with a viscosity ratio of 20. A coupled lattice Boltzmann-immersed-boundary solver is used. The periciliary layer is confined between the epithelial surface and the mucus. Its thickness is chosen such that the tips of the cilia can penetrate the mucus. A purely hydrodynamical feedback of the fluid is taken into account and a coupling parameter alpha is introduced, which allows tuning of both the direction of the wave propagation and the strength of the fluid feedback. A comparative study of both antipleptic and symplectic waves, mapping a cilium interspacing ranging from 1.67 up to 5 cilium lengths, is performed by imposing metachrony. Antipleptic waves are found to systematically outperform symplectic waves. They are shown to be more efficient for transporting and mixing the fluids, while spending less energy than symplectic, random or synchronized motions.
Sylvain Chateau, Julien Favier, Umberto D’ortona, Sebastien Poncet. Transport efficiency of metachronal waves in 3D cilium arrays immersed in a two-phase flow. Journal of Fluid Mechanics, 2017, 824, pp.931 - 961. ⟨10.1017/jfm.2017.352⟩. ⟨hal-01592834⟩
Romain Oguic, Sébastien Poncet, Stéphane Viazzo. High-order direct numerical simulations of a turbulent round impinging jet onto a rotating heated disk in a highly confined cavity. International Journal of Heat and Fluid Flow, 2016, 61 (B), pp.366-378. ⟨10.1016/j.ijheatfluidflow.2016.05.013⟩. ⟨hal-01461786⟩ Plus de détails...
The present work reports Direct Numerical Simulations (DNS) of an impinging round jet onto a rotating heated disk in a confined rotor-stator cavity. The geometrical characteristics of the system correspond to the experimental set-up developed by u. Pelle and S. Harmand. Heat transfer study in a rotor-stator system air-gap with an axial inflow. Applied Thermal Engineering, 29:1532-1543, 2009.]. The aspect ratio of the cavity G = h/R-d between the interdisk spacing h and the rotor radius R-d is fixed to 0.02 corresponding to a narrow-gap cavity. The axial Reynolds number Red based on the jet characteristics is also fixed to Re-j = 5300, while the rotational Reynolds number Re-Omega may vary to preserve the swirl parameter N proportional to Re(Omega)dRe(j) (0 <= N <= 2.47) between the present simulations and the experimental data of [J. Pelle and S. Harmand. Heat transfer study in a rotor-stator system air-gap with an axial inflow. Applied Thermal Engineering, 29:1532-1543, 2009.] and [T. D. Nguyen, J. Pelle, S. Harmand, and S. Poncet. PIV measurements of an air jet impinging on an open rotor-stator system. Experiments in Fluids, 53:401-412, 2012.] for comparisons. The results are discussed in terms of radial distributions of the mean velocity components and corresponding Reynolds stress tensor components. The swirl parameter does not modify the size of the recirculation bubble developed along the stator close to the pipe exit. For N >= 1.237, centrifugal effects at the rotor periphery are balanced by a centripetal flow along the stator. Some spiral patterns develop then in the stator boundary layer corresponding to the SRIII instability of [L. Schouveiler, P. Le Gal, and M. P. Chauve. Instabilities of the flow between a rotating and a stationary disk. Journal of Fluid Mechanics, 443:329-350, 2001.] in an enclosed cavity. The numerical results are found to agree particularly well with the experimental data in terms of the distribution of the local Nusselt number along the rotor. Finally, a correlation for its averaged value is proposed according to the swirl parameter. (C) 2016 Elsevier Inc. All rights reserved.
Romain Oguic, Sébastien Poncet, Stéphane Viazzo. High-order direct numerical simulations of a turbulent round impinging jet onto a rotating heated disk in a highly confined cavity. International Journal of Heat and Fluid Flow, 2016, 61 (B), pp.366-378. ⟨10.1016/j.ijheatfluidflow.2016.05.013⟩. ⟨hal-01461786⟩
Journal: International Journal of Heat and Fluid Flow
Sergio Croquer, Sébastien Poncet, Zine Aidoun. Turbulence modeling of a single-phase R134a supersonic ejector. Part 1: Numerical benchmark. International Journal of Refrigeration, 2016, 61 (8), pp.140-152. ⟨10.1016/j.ijrefrig.2015.07.030⟩. ⟨hal-01300110⟩ Plus de détails...
The present work reports a numerical analysis of a supersonic ejector in single-phase conditions using R134a as the working fluid. A numerical benchmark of some thermodynamic and two-equation turbulence models has been carried out to highlight the numerical model offering the best compromise between accuracy and calculation cost. The validation is achieved by comparing the predicted entrainment ratio with the experimental data of Garcia del Valle et al. (2014). The k−ω SST model together with the REFPROP 7.0 database equation appears to be the best combination to predict accurately the ejector performance and capture the shock wave structure. The influence of the outlet temperature, the discussion about the validity of some assumptions made by one-dimensional (1D) models and the exergy analysis within the ejector for the present operating conditions will later be discussed in Part 2 (Croquer et al., 2015).
Sergio Croquer, Sébastien Poncet, Zine Aidoun. Turbulence modeling of a single-phase R134a supersonic ejector. Part 1: Numerical benchmark. International Journal of Refrigeration, 2016, 61 (8), pp.140-152. ⟨10.1016/j.ijrefrig.2015.07.030⟩. ⟨hal-01300110⟩
Sergio Croquer, Sébastien Poncet, Zine Aidoun. Turbulence modeling of a single-phase R134a supersonic ejector. Part 1: Numerical benchmark. International Journal of Refrigeration, 2016, 61 (8), pp.140-152. ⟨10.1016/j.ijrefrig.2015.07.030⟩. ⟨hal-01300110⟩ Plus de détails...
The present work reports a numerical analysis of a supersonic ejector in single-phase conditions using R134a as the working fluid. A numerical benchmark of some thermodynamic and two-equation turbulence models has been carried out to highlight the numerical model offering the best compromise between accuracy and calculation cost. The validation is achieved by comparing the predicted entrainment ratio with the experimental data of Garcia del Valle et al. (2014). The k−ω SST model together with the REFPROP 7.0 database equation appears to be the best combination to predict accurately the ejector performance and capture the shock wave structure. The influence of the outlet temperature, the discussion about the validity of some assumptions made by one-dimensional (1D) models and the exergy analysis within the ejector for the present operating conditions will later be discussed in Part 2 (Croquer et al., 2015).
Sergio Croquer, Sébastien Poncet, Zine Aidoun. Turbulence modeling of a single-phase R134a supersonic ejector. Part 1: Numerical benchmark. International Journal of Refrigeration, 2016, 61 (8), pp.140-152. ⟨10.1016/j.ijrefrig.2015.07.030⟩. ⟨hal-01300110⟩
Zhe Li, Julien Favier, Umberto D 'Ortona, Sébastien Poncet. An immersed boundary-lattice Boltzmann method for single- and multi-component fluid flows. Journal of Computational Physics, 2016, 304, pp.424-440. ⟨10.1016/j.jcp.2015.10.026⟩. ⟨hal-01225681⟩ Plus de détails...
The paper presents a numerical method to simulate single-and multi-component fluid flows around moving/deformable solid boundaries, based on the coupling of Immersed Boundary (IB) and Lattice Boltzmann (LB) methods. The fluid domain is simulated with LB method using the single relaxation time BGK model, in which an interparticle potential model is applied for multi-component fluid flows. The IB-related force is directly calculated with the interpolated definition of the fluid macroscopic velocity on the Lagrangian points that define the immersed solid boundary. The present IB-LB method can better ensure the no-slip solid boundary condition, thanks to an improved spreading operator. The proposed method is validated through several 2D/3D single-and multi-component fluid test cases with a particular emphasis on wetting conditions on solid wall. Finally, a 3D two-fluid application case is given to show the feasibility of modeling the fluid transport via a cluster of beating cilia.
Zhe Li, Julien Favier, Umberto D 'Ortona, Sébastien Poncet. An immersed boundary-lattice Boltzmann method for single- and multi-component fluid flows. Journal of Computational Physics, 2016, 304, pp.424-440. ⟨10.1016/j.jcp.2015.10.026⟩. ⟨hal-01225681⟩
Romain Oguic, Stéphane Viazzo, Sébastien Poncet. A parallelized multidomain compact solver for incompressible turbulent flows in cylindrical geometries. Journal of Computational Physics, 2015, 300, pp.710-731. ⟨10.1016/j.jcp.2015.08.003⟩. ⟨hal-01299082⟩ Plus de détails...
We present an efficient parallelized multidomain algorithm for solving the 3D Navier–Stokes equations in cylindrical geometries. The numerical method is based on fourth-order compact schemes in the two non-homogeneous directions and Fourier series expansion in the azimuthal direction. The temporal scheme is a second-order semi-implicit projection scheme leading to the solution of five Helmholtz/Poisson equations. To handle the singularity appearing at the axis in cylindrical coordinates, while being able to have a thinner or conversely a coarser mesh in this zone, parity conditions are imposed at r=0r=0 for each flow variable and azimuthal Fourier mode. To simulate flows in irregularly shaped cylindrical geometries and benefit from a hybrid OpenMP/MPI parallelization, an accurate perfectly free-divergence multidomain method based on the influence matrix technique is proposed. First, the accuracy of the present solver is checked by comparison with analytical solutions and the scalability is then evaluated. Simulations using the present code are then compared to reliable experimental and numerical results of the literature showing good quantitative agreements in the cases of the axisymmetric and 3D unsteady vortex breakdowns in a cylinder and turbulent pipe flow. Finally to show the capability of the algorithm to deal with more complex flows relevant of turbomachineries, the turbulent flow inside a simplified stage of High-Pressure compressor is considered.
Romain Oguic, Stéphane Viazzo, Sébastien Poncet. A parallelized multidomain compact solver for incompressible turbulent flows in cylindrical geometries. Journal of Computational Physics, 2015, 300, pp.710-731. ⟨10.1016/j.jcp.2015.08.003⟩. ⟨hal-01299082⟩
Adrien Aubert, Sébastien Poncet, Patrice Le Gal, Stéphane Viazzo, Michael Le Bars. Velocity and temperature measurements in a turbulent water-filled Taylor–Couette–Poiseuille system. International Journal of Thermal Sciences, 2015, 90, pp.238-247. ⟨10.1016/j.ijthermalsci.2014.12.018⟩. ⟨hal-01308638⟩ Plus de détails...
Motivated by the difficulties encountered by engineers to cool down the rotating shafts of industrial machines, the present work investigates the heat and mass transfers in the rotor-stator gap of a Taylor–Couette system with an axial water flow characterized by an aspect ratio Γ = 50 and a radius ratio η = 8/9. Extensive velocity and temperature measurements have been performed on an experimental set-up for a wide range of the flow parameters: the axial Reynolds number Re and the Taylor number Ta reach the values 1.12 × 104 and 7.9 × 107 respectively. In particular, coherent structures close to the rotating wall were measured by Stereo Particle Image Velocimetry. A correlation for the Nusselt number Nu on the rotating wall is finally provided against the axial Reynolds, Taylor and Prandtl numbers. Nu is proportional to the Taylor number to the power ∼0.13 close to the exponent 1/7 highlighted by an analytical model. This small exponent traduces the control of heat transfers by the rotating viscous layer and thus may explain the difficulty met by engineers to develop strategies for the effective cooling of such rotating apparatus.
Adrien Aubert, Sébastien Poncet, Patrice Le Gal, Stéphane Viazzo, Michael Le Bars. Velocity and temperature measurements in a turbulent water-filled Taylor–Couette–Poiseuille system. International Journal of Thermal Sciences, 2015, 90, pp.238-247. ⟨10.1016/j.ijthermalsci.2014.12.018⟩. ⟨hal-01308638⟩
Journal: International Journal of Thermal Sciences
Adrien Aubert, Sébastien Poncet, Patrice Le Gal, Stéphane Viazzo, Michael Le Bars. Velocity and temperature measurements in a turbulent water-filled Taylor–Couette–Poiseuille system. International Journal of Thermal Sciences, 2015, 90, pp.238-247. ⟨10.1016/j.ijthermalsci.2014.12.018⟩. ⟨hal-01308638⟩ Plus de détails...
Motivated by the difficulties encountered by engineers to cool down the rotating shafts of industrial machines, the present work investigates the heat and mass transfers in the rotor-stator gap of a Taylor–Couette system with an axial water flow characterized by an aspect ratio Γ = 50 and a radius ratio η = 8/9. Extensive velocity and temperature measurements have been performed on an experimental set-up for a wide range of the flow parameters: the axial Reynolds number Re and the Taylor number Ta reach the values 1.12 × 104 and 7.9 × 107 respectively. In particular, coherent structures close to the rotating wall were measured by Stereo Particle Image Velocimetry. A correlation for the Nusselt number Nu on the rotating wall is finally provided against the axial Reynolds, Taylor and Prandtl numbers. Nu is proportional to the Taylor number to the power ∼0.13 close to the exponent 1/7 highlighted by an analytical model. This small exponent traduces the control of heat transfers by the rotating viscous layer and thus may explain the difficulty met by engineers to develop strategies for the effective cooling of such rotating apparatus.
Adrien Aubert, Sébastien Poncet, Patrice Le Gal, Stéphane Viazzo, Michael Le Bars. Velocity and temperature measurements in a turbulent water-filled Taylor–Couette–Poiseuille system. International Journal of Thermal Sciences, 2015, 90, pp.238-247. ⟨10.1016/j.ijthermalsci.2014.12.018⟩. ⟨hal-01308638⟩
Journal: International Journal of Thermal Sciences
Bikash Sahoo, Sébastien Poncet, Fotini Labropulu. Suction/Injection Effects on the Swirling Flow of a Reiner-Rivlin Fluid near a Rough Surface. Hindawi Publishing Corporation, 2015, 2015, Article ID 253504, 5 p. ⟨10.1155/2015/253504⟩. ⟨hal-01100098⟩ Plus de détails...
The similarity equations for the Bödewadt flow of a non-Newtonian Reiner-Rivlin fluid, subject to uniform suction/injection, are solved numerically. The conventional no-slip boundary conditions are replaced by corresponding partial slip boundary conditions, owing to the roughness of the infinite stationary disk. The combined effects of surface slip, suction/injection velocity, and cross-viscous parameter on the momentum boundary layer are studied in detail. It is interesting to find that suction dominates the oscillations in the velocity profiles and decreases the boundary layer thickness significantly. On the other hand, injection has opposite effects on the velocity profiles and the boundary layer thickness.
Bikash Sahoo, Sébastien Poncet, Fotini Labropulu. Suction/Injection Effects on the Swirling Flow of a Reiner-Rivlin Fluid near a Rough Surface. Hindawi Publishing Corporation, 2015, 2015, Article ID 253504, 5 p. ⟨10.1155/2015/253504⟩. ⟨hal-01100098⟩
Nabila Ait-Moussa, Sébastien Poncet, Abdelrahmane Ghezal. Numerical Simulations of Co- and Counter-Taylor-Couette Flows: Influence of the Cavity Radius Ratio on the Appearance of Taylor Vortices. American Journal of Fluid Dynamics, 2015, 5 (1), pp.17-22. ⟨10.5923/j.ajfd.20150501.02⟩. ⟨hal-01300130⟩ Plus de détails...
Taylor-Couette flows in the annular region between rotating concentric cylinders are studied numerically to determine the combined effects of the co- and counter-rotation of the outer cylinder and the radius ratio on the system response. The computational procedure is based on a finite volume method using staggered grids. The axisymmetric conservative governing equations are solved using the SIMPLER algorithm. One considers the flow confined in a finite cavity with radius ratios η = 0.25, 0.5, 0.8 and 0.97. One has determined the critical points and properties for the bifurcation from the basic circular Couette flow (CCF) to the Taylor Vortex Flow (TVF) state. Indeed, the results are presented in terms of the critical Reynolds number Rei of the inner cylinder that depends on the rotational Reynolds number of the outer cylinder Reo and η. To show the capability of the present code, excellent quantitative agreement has been obtained between the calculations and previous experimental measurements for a wide range of radius ratios and rotation rates.
Nabila Ait-Moussa, Sébastien Poncet, Abdelrahmane Ghezal. Numerical Simulations of Co- and Counter-Taylor-Couette Flows: Influence of the Cavity Radius Ratio on the Appearance of Taylor Vortices. American Journal of Fluid Dynamics, 2015, 5 (1), pp.17-22. ⟨10.5923/j.ajfd.20150501.02⟩. ⟨hal-01300130⟩
Adrien Aubert, Sébastien Poncet, Patrice Le Gal, Stéphane Viazzo, Michel Lebars. Velocity and temperature measurements in a turbulent water-filled Taylor-Couette-Poiseuille system. International Journal of Thermal Sciences, 2015. ⟨hal-01467719⟩ Plus de détails...
Motivated by the difficulties encountered by engineers to cool down the rotating shafts of industrial machines, the present work investigates the heat and mass transfers in the rotor-stator gap of a Taylor–Couette system with an axial water flow characterized by an aspect ratio Γ = 50 and a radius ratio η = 8/9. Extensive velocity and temperature measurements have been performed on an experimental set-up for a wide range of the flow parameters: the axial Reynolds number Re and the Taylor number Ta reach the values 1.12 × 104 and 7.9 × 107 respectively. In particular, coherent structures close to the rotating wall were measured by Stereo Particle Image Velocimetry. A correlation for the Nusselt number Nu on the rotating wall is finally provided against the axial Reynolds, Taylor and Prandtl numbers. Nu is proportional to the Taylor number to the power ∼0.13 close to the exponent 1/7 highlighted by an analytical model. This small exponent traduces the control of heat transfers by the rotating viscous layer and thus may explain the difficulty met by engineers to develop strategies for the effective cooling of such rotating apparatus.
Adrien Aubert, Sébastien Poncet, Patrice Le Gal, Stéphane Viazzo, Michel Lebars. Velocity and temperature measurements in a turbulent water-filled Taylor-Couette-Poiseuille system. International Journal of Thermal Sciences, 2015. ⟨hal-01467719⟩
Journal: International Journal of Thermal Sciences
Bikash Sahoo, Sébastien Poncet, Fotini Labropulu. Effects of slip on the Von Kármán swirling flow and heat transfer in a porous medium. Transactions of the Canadian Society for Mechanical Engineering, 2015, 39 (2), pp.357-366. ⟨10.1139/tcsme-2015-0025⟩. ⟨hal-01300117⟩ Plus de détails...
Numerical solutions are obtained for the fully coupled and highly nonlinear system of differential equations, arising due to the steady Kármán flow and heat transfer of a viscous fluid in a porous medium. The conventional no-slip boundary conditions are replaced by partial slip boundary conditions owing to the roughness of the disk surface. Combined effects of the slip λ and porosity γ parameters on the momentum and thermal boundary layers are studied in detail. Both parameters produce the same effects on the mean velocity profiles, such that all velocity components are reduced by increasing either λ or γ. The temperature slip factor β has a dominating influence on the temperature profiles by decreasing the fluid temperature in the whole domain. The porosity parameter strongly decreases the heat transfer coefficient at the wall for low values of β and tends to an asymptotical limit around 0.1 for β 10. The porosity parameter γ increases the moment coefficient at the disk surface, which is found to monotonically decrease with λ .
Bikash Sahoo, Sébastien Poncet, Fotini Labropulu. Effects of slip on the Von Kármán swirling flow and heat transfer in a porous medium. Transactions of the Canadian Society for Mechanical Engineering, 2015, 39 (2), pp.357-366. ⟨10.1139/tcsme-2015-0025⟩. ⟨hal-01300117⟩
Journal: Transactions of the Canadian Society for Mechanical Engineering
Sébastien Poncet, Stéphane Viazzo, Oguic Romain. Large eddy simulations of Taylor-Couette-Poiseuille flows in a narrow-gap system. Physics of Fluids, 2014, 26 (10), pp.105108. ⟨10.1063/1.4899196⟩. ⟨hal-01083052⟩ Plus de détails...
The present paper concerns Large-Eddy Simulations (LES) of turbulent Taylor-Couette-Poiseuille flows in a narrow-gap cavity for six different combinations of rotational and axial Reynolds numbers. The in-house numerical code has been first validated in a middle-gap cavity. Two sets of refined LES results, using the Wall-Adapting Local EddyViscosity(WALE) and theDynamic Smagorinsky subgrid-scale models availablewithin an in-house code based on high-order compact schemes, have been then compared with no noticeable difference on the mean flow field and theturbulent statistics. The WALE model enabling a saving of about 12% of computational effort has been finally used to investigate the influence on the hydrodynamics of the swirl parameter N within the range [1.49 − 6.71]. The swirl parameter N, which compares the effects of rotation of the inner cylinder and the axial flowrate, does not influence significantly the mean velocity profiles. Turbulence intensities are enhanced with increasing values of N with remarkably high peak values within the boundary layers. The inner rotating cylinder has a destabilizing effect inducing asymmetric profiles of the Reynolds stress tensor components. The rotor and stator boundary layers exhibit the main characteristics of two-dimensional boundary layers.Turbulence is also mainly at two-component there. Thin coherent structures appearing as negative (resp. positive) spiral rolls are observed along the rotor (resp. stator) side. Their inclination angle depends strongly on the value of the swirl parameter, which fixes the intensity of the crossflow. On the other hand, the intensity and the size of the coherent structures observed within the boundary layers are governed by the effective Reynolds number. For its highest value, they penetrate the whole gap. Finally, the results have been extended to the non-isothermal case in the forced convection regime. A correlation for the Nusselt number along the rotor has been provided showing a much larger dependence on the axial Reynolds number thanexpected from previous published works, while it depends classically on the Taylor number to the power 0.145 and on the Prandtl number to the power 0.3.
Sébastien Poncet, Stéphane Viazzo, Oguic Romain. Large eddy simulations of Taylor-Couette-Poiseuille flows in a narrow-gap system. Physics of Fluids, 2014, 26 (10), pp.105108. ⟨10.1063/1.4899196⟩. ⟨hal-01083052⟩
Stéphane Viazzo, Sébastien Poncet. Numerical simulation of the flow stability in a high aspect ratio Taylor–Couette system submitted to a radial temperature gradient. Computers and Fluids, 2014, 101, pp.15-26. ⟨10.1016/j.compfluid.2014.05.025⟩. ⟨hal-01083054⟩ Plus de détails...
From 28 high-order DNS computations, one investigates the formation of instabilities due to the strong competition between an azimuthal flow induced by rotation and an axial flow due to convection in a tall Taylor–Couette apparatus (gamma=80; eta=0.8) submitted to a radial temperature gradient. One explores the richness of the transition diagram that reports seven different flow patterns appearing either as spiral rolls, wavy vortices or a combination of both depending on the Taylor and Rayleigh numbers. The partial spiral regime observed experimentally by Guillerm (2010) is not recovered at very low Rayleigh numbers. The spatio-temporal properties of the different spirals close to the threshold of the primary instability are fairly predicted and a new insight on the flow and thermal structures of the instabilities is gained from this study. Finally, the distributions of the Nusselt number against the Taylor number are established for various Rayleigh numbers.
Stéphane Viazzo, Sébastien Poncet. Numerical simulation of the flow stability in a high aspect ratio Taylor–Couette system submitted to a radial temperature gradient. Computers and Fluids, 2014, 101, pp.15-26. ⟨10.1016/j.compfluid.2014.05.025⟩. ⟨hal-01083054⟩
Sébastien Poncet. The stability of a thin water layer over a rotating disk revisited. The European Physical Journal Plus, 2014, 129, pp.167. ⟨10.1140/epjp/i2014-14167-2⟩. ⟨hal-01083053⟩ Plus de détails...
The flow driven by a rotating disk of a thin fluid layer in a fixed cylindrical casing is studied by direct numerical simulation and experimental flow visualizations. The characteristics of the flow are first briefly discussed but the focus of this work is to understand the transition to the primary instability. The primary bifurcation is 3D and appears as spectacular sharp-cornered polygonal patterns located along the shroud. The stability diagram is established experimentally in a (Re, G) plane, where G is the aspect ratio of the cavity and Re the rotational Reynolds number and confirmed numerically. The number of vortices scales well with the Ekman number based on the water depth, which confirms the existence of a Stewartsonlayer along the external cylinder. The critical mixed Reynolds number is found to be constant as in other rotating flows involving a shear-layer instability. Hysteresis cycles are observed highlighting the importance of the spin-up and spin-down processes. In some particular cases, a crossflow instability appears under the form of high azimuthal wave number spiral patterns, similar to those observed in a rotor-stator cavity with throughflow and coexists with the polygons. The DNS calculations confirm the experimental results under the flat free surface hypothesis.
Sébastien Poncet. The stability of a thin water layer over a rotating disk revisited. The European Physical Journal Plus, 2014, 129, pp.167. ⟨10.1140/epjp/i2014-14167-2⟩. ⟨hal-01083053⟩
Guillaume Fontaine, Sébastien Poncet, Eric Serre. Multidomain Extension of a Pseudospectral Algorithm for the Direct Simulation of Wall-Confined Rotating Flows. M. Azaiez, H. El Fekih, J.S. Hesthaven. Lecture Notes in Computational Science and Engineering, 95, Springer, pp.261 - 271, 2014, ⟨10.1007/978-3-319-01601-6_21⟩. ⟨hal-01098589⟩ Plus de détails...
In this work, we improve an existing pseudospectral algorithm, in order to extend its properties to a multidomain patching of a rotating cavity. Viscous rotating flows have been widely studied over the last decades, either on industrial or aca-demic approaches. Nevertheless, the range of Reynolds numbers reached in indus-trial devices implies very high resolutions of the spatial problem, which are clearly unreachable using a monodomain approach. Hence, we worked on the multido-main extension of the existing divergence-free Navier-Stokes solver with a Schur approach. The particularity of such an approach is that it does not require any sub-domain superposition: the value of a variable on the boundary between two adjacent subdomains is treated as a boundary condition of a local Helmholtz solver. This value is computed on a direct way via a so-called continuity influence matrix and the derivative jump of an homogeneous solution computed independently on each subdomain. Such a method is known to have both good scalability and accuracy. It has been validated on two well documented three-dimensional rotating flows.
Guillaume Fontaine, Sébastien Poncet, Eric Serre. Multidomain Extension of a Pseudospectral Algorithm for the Direct Simulation of Wall-Confined Rotating Flows. M. Azaiez, H. El Fekih, J.S. Hesthaven. Lecture Notes in Computational Science and Engineering, 95, Springer, pp.261 - 271, 2014, ⟨10.1007/978-3-319-01601-6_21⟩. ⟨hal-01098589⟩
Bikash Sahoo, Saied Abbasbandy, Sébastien Poncet. A brief note on the computation of the Bödewadt flow with Navier slip boundary conditions. Computers and Fluids, 2014, 90, pp.133-137. ⟨10.1016/j.compfluid.2013.11.020⟩. ⟨hal-00976676⟩ Plus de détails...
In this short communication, numerical solutions are obtained for the steady Bödewadt flow of a viscous fluid subject to partial slip boundary conditions. The resulting system of nonlinear and fully coupled similarity equations are integrated accurately by a finite difference scheme and by the Keller-box method. It is observed that slip has a prominent effect on the velocity field, reducing drastically the axial velocity and the pressure. Moreover, the torque required to maintain the disk at rest decreases for increasing values of slip.
Bikash Sahoo, Saied Abbasbandy, Sébastien Poncet. A brief note on the computation of the Bödewadt flow with Navier slip boundary conditions. Computers and Fluids, 2014, 90, pp.133-137. ⟨10.1016/j.compfluid.2013.11.020⟩. ⟨hal-00976676⟩
Sébastien Poncet, Thien Duy Nguyen, Souad Harmand, Julien Pellé, Riccardo da Soghe, et al.. Turbulent impinging jet flow into an unshrouded rotor-stator system: Hydrodynamics and heat transfer. International Journal of Heat and Fluid Flow, 2013, 44, pp.719-734. ⟨10.1016/j.ijheatfluidflow.2013.10.001⟩. ⟨hal-00976669⟩ Plus de détails...
New calculations using an innovative Reynolds Stress Model are compared to velocity measurements performed by Particle Image Velocimetry technique and the predictions of a k-w SST model in the case of an impinging jet flow onto a rotating disk in a discoidal and unshrouded rotor-stator system. The cavity is characterized by a dimensionless spacing interval G=0.02 and a low aspect ratio for the jet e/D=0.25. Jet Reynolds numbers ranging from 17200 to 43000 and rotational Reynolds numbers between 33000 and 532000 are considered. Three flow regions have been identified: a jet-dominated flow area at low radii characterized by a zero tangential velocity, a mixed region at intermediate radii and rotation-dominated flow region outwards. For all parameters, turbulence, which tends to the isotropic limit in the core, is much intense in a region located after the impingement zone. A relative good agreement between the PIV measurements and the predictions of the RSM has been obtained in terms of the radial distributions of the core-swirl ratio and of the turbulence intensities. The k-wSST model overestimates these flow characteristics in the jet dominated area. For the thermal field, the heat transfers are enhanced in the jet dominated region and decreases towards the periphery of the cavity. The jet Reynolds number appears to have a preponderant effect compared to the rotational one on the heat transfer distribution. The two RANS modelings compare quite well with the heat transfer measurements for these ranges of parameters.
Sébastien Poncet, Thien Duy Nguyen, Souad Harmand, Julien Pellé, Riccardo da Soghe, et al.. Turbulent impinging jet flow into an unshrouded rotor-stator system: Hydrodynamics and heat transfer. International Journal of Heat and Fluid Flow, 2013, 44, pp.719-734. ⟨10.1016/j.ijheatfluidflow.2013.10.001⟩. ⟨hal-00976669⟩
Journal: International Journal of Heat and Fluid Flow
Bikash Sahoo, Sébastien Poncet. Blasius flow and heat transfer of fourth-grade fluid with slip. Applied Mathematics and Mechanics, 2013, 34 (12), pp.1465-1480. ⟨10.1007/s10483-013-1760-6⟩. ⟨hal-00975631⟩ Plus de détails...
This investigation deals with the effects of slip, magnetic field, and non-Newtonian flow parameters on the flow and heat transfer of an incompressible, electrically conducting fourth-grade fluid past an infinite porous plate. The heat transfer analysis is carried out for two heating processes. The system of highly non-linear differential equations is solved by the shooting method with the fourth-order Runge-Kutta method for moderate values of the parameters. The effective Broyden technique is adopted in order to improve the initial guesses and to satisfy the boundary conditions at infinity. An exceptional cross-over is obtained in the velocity profile in the presence of slip. The fourth-grade fluid parameter is found to increase the momentum boundary layer thickness, whereas the slip parameter substantially decreases it. Similarly, the non-Newtonian fluid parameters and the slip have opposite effects on the thermal boundary layer thickness.
Bikash Sahoo, Sébastien Poncet. Blasius flow and heat transfer of fourth-grade fluid with slip. Applied Mathematics and Mechanics, 2013, 34 (12), pp.1465-1480. ⟨10.1007/s10483-013-1760-6⟩. ⟨hal-00975631⟩
Sébastien Poncet, Stéphane Viazzo, Adrien Aubert, Riccardo da Soghe, Cosimo Bianchini. Turbulent Couette-Taylor flows with endwall effects: a numerical benchmark. International Journal of Heat and Fluid Flow, 2013, 44, pp.229-238. ⟨10.1016/j.ijheatfluidflow.2013.05.018⟩. ⟨hal-00975636⟩ Plus de détails...
The accurate prediction of fluid flow within rotating systems has a primary role for the reliability and performance of rotating machineries. The selection of a suitable model to account for the effects of turbulence on such complex flows remains an open issue in the literature. This paper reports a numerical benchmark of different approaches available within commercial CFD solvers together with results obtained by means of in-house developed or open-source available research codes exploiting a suitable Reynolds Stress Model (RSM) closure, Large Eddy Simulation (LES) and a direct numerical simulation (DNS). The predictions are compared to the experimental data of Burin et al. (2010) in an original enclosed Couette-Taylor apparatus with endcap rings. The results are discussed in details for both the mean and turbulent fields. A particular attention has been turned to the scaling of the turbulent angular momentum G with the Reynolds number Re. By DNS, G is found to be proportional to Rea, the exponent a = 1.9 being constant in our case for the whole range of Reynolds numbers. Most of the approaches predict quite well the good trends apart from the k-w SST model, which provides relatively poor agreement with the experiments even for the mean tangential velocity profile. Among the RANS models, even though no approach appears to be fully satisfactory, the RSM closure offers the best overall agreement.
Sébastien Poncet, Stéphane Viazzo, Adrien Aubert, Riccardo da Soghe, Cosimo Bianchini. Turbulent Couette-Taylor flows with endwall effects: a numerical benchmark. International Journal of Heat and Fluid Flow, 2013, 44, pp.229-238. ⟨10.1016/j.ijheatfluidflow.2013.05.018⟩. ⟨hal-00975636⟩
Journal: International Journal of Heat and Fluid Flow
Souad Harmand, Julien Pellé, Sébastien Poncet, Igor Shevchuk. Review of fluid flow and convective heat transfer within rotating disk cavities with impinging jet. International Journal of Thermal Sciences, 2013, 67, pp.1-30. ⟨10.1016/j.ijthermalsci.2012.11.009⟩. ⟨hal-00975626⟩ Plus de détails...
Fluid flow and convective heat transfer in rotor-stator configurations, which are of great importance in different engineering applications, are treated in details in this review. The review focuses on convective heat transfer in predominantly outward air flow in the rotor-stator geometries with and without impinging jets and incorporates two main parts, namely, experimental / theoretical methodologies and geometries/results. Experimental methodologies include naphthalene sublimation techniques, steadystate (thin layer) and transient (thermochromic liquid crystals) thermal measurements, thermocouples and infra-red cameras, hot-wire anemometry, laser Doppler and particle image velocimetry, laser plane and smoke generator. Theoretical approaches incorporate modern CFD computational tools (DNS, LES, RANS etc). Geometries and results part being mentioned starting from simple to complex elucidates cases of a free rotating disk, a single disk in the crossflow, single jets impinging onto stationary and rotating disk, rotor-stator systems without and with impinging single jets, as well as multiple jets. Conclusions to the review outline perspectives of the further extension of the investigations of different kinds of the rotor-stator systems and their applications in engineering practice.
Souad Harmand, Julien Pellé, Sébastien Poncet, Igor Shevchuk. Review of fluid flow and convective heat transfer within rotating disk cavities with impinging jet. International Journal of Thermal Sciences, 2013, 67, pp.1-30. ⟨10.1016/j.ijthermalsci.2012.11.009⟩. ⟨hal-00975626⟩
Journal: International Journal of Thermal Sciences
Brian Launder, Sébastien Poncet, Eric Serre. Laminar, transitional, and turbulent flows in rotor-stator cavities. Annual Review of Fluid Mechanics, 2010, 42 (1), pp.229-248. ⟨10.1146/annurev-fluid-121108-145514⟩. ⟨hal-00678846⟩ Plus de détails...
This article reviews the range of flows that may be created within thin cylindrical or annular cavities due to the rotation of one of the confining disks. At low Reynolds numbers, the rotation gives rise to an axisymmetric, radially outward motion near the rotor with a return flow along the stationary disk. As the Reynolds number is raised, this base flow gives way to a shear flow populated by discrete vortices, whether of cylindrical or spiral form, near both the rotating and stationary disks. At Reynolds numbers high enough for turbulent flow to occur, in the twentieth century both experimental and computational studies treated the flow as axisymmetric and steady. Recent research has shown, however, that complex organized structures also persist in the turbulent regime.
Brian Launder, Sébastien Poncet, Eric Serre. Laminar, transitional, and turbulent flows in rotor-stator cavities. Annual Review of Fluid Mechanics, 2010, 42 (1), pp.229-248. ⟨10.1146/annurev-fluid-121108-145514⟩. ⟨hal-00678846⟩
